7819 SOUTH 196TH STREET
KENT, WA 98032
TEL: 253.395.9500
FAX: 253.395.9494
INFO@OMNISISTEM.COM

 

 
 
 
LIGHTING THEATRICAL FOLLOWSPOTS
 
 
 
W1196L - LANCER 2500 FOLLOWSPOT
Followspot-PSL- LANCER 2500W CODE: W1196L POWER: 220V/60Hz Absorption 15A (built in power factor correction) LAMP: OSRAM HMI2500W SE Color Temperature: 6000°K Manufacturer's Rated Lamp Life: 500 hours TYPICAL THROW: Suitable for medium and long throw applications (99-230ft) FEATURES: Front load color changer with 5 colors plus blackout included (equipped with low voltage fan for cooling color filters) Built-in Douser Lamp adjusters allow control over lamp positioning Condenser lens and two high definition lenses w/ anti-reflective treatment for zoom and focus adjusting Time meter Fan cooled Thermal safety circuit trips when temperature exceeds 90° C Built-in power factor correction system. STAND BY: The lamp's ignition switch located on the rear of the unit has a   standby position which does not switch off the lamp completely     but keeps it active and reduces the output. This enables the lamp to   be re-lit without having to wait the normal cooling time required   for re-striking. SET INCLUDES: unit, lamp, ballast, color changer, stand DIMENSIONS: 47” x 24” x 18” (unit) 21.5” x 8” x 10.5” (ballast) WEIGHT: 102 lbs (unit) 67 lbs (ballast) 16 lbs (color changer)


 
SPECIFICATIONS

CODE:  W1196L
   
POWER:  220V/60Hz (117V/60Hz with included transformer)
  Absorption 15A (built in power factor correction)
   
LAMP: OSRAM HMI2500W SE
  Color Temperature: 6000°K 
  Manufacturer’s Rated Lamp Life: 500 hours
   
TYPICAL THROW: Suitable for medium and long throw applications (99-230ft)
   
FEATURES: Front load color changer with 5 colors plus blackout included
  (equipped with low voltage fan for cooling color filters)
  Built-in Douser
  Lamp adjusters allow control over lamp positioning
  Condenser lens and two high definition lenses w/
  anti-reflective treatment for zoom and focus adjusting
  Time meter
   Fan cooled
  Thermal safety circuit trips when temperature exceeds 90° C
  Built-in power factor correction system
   
STAND BY: The lamp’s ignition switch located on the rear of the unit has a
  standby position which does not switch off the lamp completely
  but keeps it active and reduces the output. This enables the lamp to
  be re-lit without having to wait the normal cooling time required
  for re-striking.
   
UNIT DIMENSIONS:


47” x 24” x 18”     (unit)                                                
21.5” x 8” x 10.5” (ballast)
   
UNIT WEIGHT: 



102 lb (unit)                                                
67 lb   (ballast)
16 lb   (color changer) 

OmniSistem Lights & Effects
7819 South 196th Street
Kent, WA 98032
United States
Ph: 253-395-9500
Fax: 253-395-9494
e-mail: info@omnisistem.com
Powered by Fortune3
E-Commerce Solutions - Ecommerce Shopping Cart Software