- Ensure the power source is of the correct voltage for this fixture. Connect power through a direct
switch circuit, NOT a dimmer or variable circuit source.
- Disconnect unit from power when not in use.
- Do not install or operate the device in harmful environment conditions.
(i.e. extreme heat, cold, moisture or dust)
- If the unit has been exposed to extreme environmental conditions or drastic temperature fluctuations,
ensure the unit is returned to room temperature before operating.
- Do not block fan or ventilation slots while operating unit.
- Maximum Ambient Temperature is 113°C (45°C). Do not operate unit at temperatures higher than this.
- Do not move the device while in operation.
- Do not aim smoke or bubble effects near unit.
- Do not operate the unit during thunderstorms.
- Disconnect power prior to replacing fuse, servicing or cleaning unit.
- Do not use solvents or abrasive cleaners to clean the unit. Use a damp cloth only.
- Modification(s) to the device or power cord will result in termination of the dealer/manufacturer's warranty.
- Use safety cable for added security when installing the unit by the hanging bracket.
- Avoid direct eye contact with the light source.
- Do not connect this unit to a dimmer pack.
- The safest way to disconnect your power cord from main power is to grip cord end and detach from plug.
- Do not leave unit unattended while operating for extended periods of time or overnight.
Contact the
nearest dealer or service center for assistance with operating your unit.
Unauthorized tampering can cause additional damage. All units opened by an unauthorized user will not be covered under warranty.
If your unit does not turn on:
1. Check the main power source is fully functional 2. Check power cord connection on each side 3. Check that the correct fuse has been installed and it is not blown
If the unit is not responding to sound:
1. Check that the dip switches at the rear of unit to have been set to sound activation
2. Check sensitivity at the rear of the unit
For additional information regarding operation of the unit or if you have a unit to be sent in for service*,
contact the OmniSistem Technical Department at 253-395-9500 Monday - Friday 10am - 4pm PST .
* All service items must be given an RA# prior to shipping to our facilities. You can acquire a RA #
by calling our offices during regular business hours. All service items must be shipped with a copy
of original receipt if purchased within a year and covered under our warranty policy. If the unit has been
modified warranty is void.
If the unit is not responding to sound:
Check that the dip switches at the rear of unit to have been set to sound activation
Check sensitivity switch at the rear of the unit
For additional information regarding operation of the unit or if you have a unit to be sent in for service*,
contact the OmniSistem Technical Department at 253-395-9500 Monday - Friday 10am - 4pm PST .
* All service items must be given an RA# prior to shipping to our facilities. You can acquire a RA #
by calling our offices during regular business hours. All service items must be shipped with a copy
of original receipt if purchased within a year and covered under our warranty policy. If the unit has been
modified warranty is void.
OmniSistem Lights & Effects
