| |
|
|
 |
 |
 |
| |
 |
OS-LED-STRIP252 - OMNI LED STRIP 252 |
 |
OMNI LED STRIP 252 - (252 10mm 0.2W LEDs (84 Red, 84 Blue, 84 Green), SA/MS, DMX (6 channels), Dimmer/Strobe
|
|
|
 |
 |
 |
|
|
 |
|
 |
 |
|
 |
VOLTAGES: 220/230V AC 50/60Hz
POWER CONSUMPTION: 2800W, 220V
LAMP OPTIONS: OSRAM HMI 2500W/SE discharge lamp
Socket: G38, single ended
Colour temperature: 6000°K
Manufacturers Rated Lamp life: 500 Hours
Luminous flux: 240000lm
CONTROL: DMX 512 : 6 channels
Auto program Stand-alone control mode: 7programs
Auto program Master/Slave control mode: 7programs
COLORS: CYM color mixing, white, blackout
SHOOTING DISTANCE: Around 100 meters
DIMMER: Linear dimming from 0-100%
Thermal cut-off
BEAM COVERAGE: 12°~35°
HEAD ADJUSTMENT: Tilt 15°~90° (Manually adjustable)
OTHERFUNCTIONS: Linear dimming from 0-100%, thermal cut-off
IN CONFORMITY WITH THE CE STANDARD AND ROHS DIRECTIVE
HOUSING: Cast aluminum with sliver paint finish and metal plate
with epoxy powder paint finish
IP RATING: IP44
- This unit is intended for indoor use only.
- Ensure the power source is of the correct voltage for this fixture. Connect power through a direct switch circuit, NOT a dimmer or variable circuit source.
- Disconnect unit from power when not in use.
- Do not install or operate the device in harmful environment conditions.
(i.e. extreme heat, cold, moisture or dust)
- If the unit has been exposed to extreme environmental conditions or drastic temperature fluctuations,
ensure the unit is returned to room temperature before operating.
- Do not block fan or ventilation slots while operating unit.
- Maximum Ambient Temperature is  113° C (45° C). Do not operate unit at temperatures higher than this.
- Do not move the device while in operation.
- Do not aim smoke or bubble effects near unit.
- Do not operate the unit during thunderstorms.
- Disconnect power prior to replacing fuse, servicing or cleaning unit.
- Do not use solvents or abrasive cleaners to clean the unit. Use a damp cloth only.
- Modification(s) to the device or power cord will result in termination of the dealer/manufacturer’s warranty.Â
- Use safety cable for added security when installing the unit by the hanging bracket.
- Avoid direct eye contact with the light source.
- Do not connect this unit to a dimmer pack.
- The safest way to disconnect your power cord from main power is to grip cord end and detach from plug.
- Do not leave unit unattended while operating for extended periods of time or overnight.
Contact the nearest dealer or service center for assistance with operating your unit.
Unauthorized tampering can cause additional damage. All units opened by an unauthorized user will not be covered under warranty.
|
|
|
|
 |
 |
 |
 |
|
|
 OmniSistem Lights & Effects
7819 South 196th Street
Kent, WA 98032
United States
Ph: 253-395-9500
Fax: 253-395-9494
e-mail: info@omnisistem.com
Powered by Fortune3
E-Commerce Solutions - Ecommerce Shopping Cart Software
|
|
